Aug 28, 2013
07:58 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Aug 28, 2013
07:58 PM
Hi,
I am using the XMC1100 Boot-kit. Keep encountering the "TASKING Debugger - Component framework has stopped working" message during debugging (see attach screen shot) can anyone advise how can I resolve this? When the message pops up DAVE3 (3.1.6) will quit.
Thanks
Regards
Timothy
I am using the XMC1100 Boot-kit. Keep encountering the "TASKING Debugger - Component framework has stopped working" message during debugging (see attach screen shot) can anyone advise how can I resolve this? When the message pops up DAVE3 (3.1.6) will quit.
Thanks
Regards
Timothy
- Tags:
- IFX
3 Replies
Not applicable
Aug 29, 2013
01:15 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Aug 29, 2013
01:15 AM
Hi Timothy,
I've never encountered this problem before. Would you mind to provide some more details eg. Seggar version, DAVE installation details etc.? Have you tried to run some DAVE example projects before?
Best regards,
Sophia
I've never encountered this problem before. Would you mind to provide some more details eg. Seggar version, DAVE installation details etc.? Have you tried to run some DAVE example projects before?
Best regards,
Sophia
Aug 29, 2013
02:12 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Aug 29, 2013
02:12 AM
Below is the output from Dave Console windows. My project is able to run just that the message pops up at random and once it happen DAVES shut down.
TASKING VX-toolset for ARM: debugger, Build 188
Copyright 2006-2013 Altium BV
VTarget = 3.300V
Launching configuration: test
Loading application "C:\temp\DAVE_CE_WS_v316\test\Debug\test.elf"...
Warning: CPU is running at low speed (6134 kHz).
Using Debug Target Configuration:
Target: Infineon Boot Kit for XMC1100
Selected CPU type: ARMv6M
Register file: C:/DAVE-3.1/Debugger/etc/sfr/CM0/DeviceSupport/Infineon/XMC1100_series/XMC1100.xml
Communication: J-Link over USB (SWD)
Debug Instrument Module: dijlinkarm
Using Flash Configuration:
Monitor : fxmc1xxx.sre
Workspace address : 0x20000000
Number of devices : 1
Device 0:
Address : 0x10001000
Vendor : Infineon
Chip : XMC1XXX/64K
Width : 32
Size : 65536
Number of chips : 1
Unused address line : 0
Configuration: Default
Using Java Link Version 1.113
Starting Debugger...
TASKING VX-toolset for ARM: debugger, Build 188
Copyright 2006-2013 Altium BV
VTarget = 3.300V
Launching configuration: test
Loading application "C:\temp\DAVE_CE_WS_v316\test\Debug\test.elf"...
Warning: CPU is running at low speed (6134 kHz).
Using Debug Target Configuration:
Target: Infineon Boot Kit for XMC1100
Selected CPU type: ARMv6M
Register file: C:/DAVE-3.1/Debugger/etc/sfr/CM0/DeviceSupport/Infineon/XMC1100_series/XMC1100.xml
Communication: J-Link over USB (SWD)
Debug Instrument Module: dijlinkarm
Using Flash Configuration:
Monitor : fxmc1xxx.sre
Workspace address : 0x20000000
Number of devices : 1
Device 0:
Address : 0x10001000
Vendor : Infineon
Chip : XMC1XXX/64K
Width : 32
Size : 65536
Number of chips : 1
Unused address line : 0
Configuration: Default
Using Java Link Version 1.113
Starting Debugger...
Not applicable
Aug 29, 2013
11:30 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Aug 29, 2013
11:30 PM
Hi Timothy,
It seems the problem can be easily triggered during running your project. Would you mind to share your project for the problem analysing?
Best regards,
Sophia
It seems the problem can be easily triggered during running your project. Would you mind to share your project for the problem analysing?
Best regards,
Sophia