Not applicable
Jul 31, 2013
02:54 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 31, 2013
02:54 AM
Flash002_WritePage API provides one page Flash program using Write Page command. In PFLASH a page is an aligned group of 256 bytes with a word-line programmed at once. This function returns only once the programming is completed or once the programming has resulted in error condition.
Note: Flash002 API will not automatically erase the flash before programming. So, user needs to do erasing every time before programming.
The data in the PFLASH is stored with ECC codes. The ECC is automatically generated when programming the PFLASH and automatically evaluated when reading data. This algorithm has the Single Error Correction (SEC) and Double Error Detection (DED) capabilities.
Note: The double-bit error interrupt will be triggered with FCON.PFDBERM being set by default. It can be disabled by setting MARP.TRAPDIS bit.
Note: Flash002 API will not automatically erase the flash before programming. So, user needs to do erasing every time before programming.
The data in the PFLASH is stored with ECC codes. The ECC is automatically generated when programming the PFLASH and automatically evaluated when reading data. This algorithm has the Single Error Correction (SEC) and Double Error Detection (DED) capabilities.
Note: The double-bit error interrupt will be triggered with FCON.PFDBERM being set by default. It can be disabled by setting MARP.TRAPDIS bit.
3 Replies
Not applicable
Jul 22, 2014
05:30 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 22, 2014
05:30 PM
Hi,
I'm using DAVE 3.1.10, and an XMC4400 microcontroller (specifically, the XMC4400 General Purpose board of the hexagon application kit).
I can't find a description of the FLASH002 App. Can you point me to it?
Thanks!
EDIT: Never mind, I found it. The APIs of all Apps can be found in DAVE under Help -> Help Contents -> DAVE Apps. Thanks!
I'm using DAVE 3.1.10, and an XMC4400 microcontroller (specifically, the XMC4400 General Purpose board of the hexagon application kit).
I can't find a description of the FLASH002 App. Can you point me to it?
Thanks!
EDIT: Never mind, I found it. The APIs of all Apps can be found in DAVE under Help -> Help Contents -> DAVE Apps. Thanks!
Not applicable
Jul 22, 2014
07:53 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 22, 2014
07:53 PM
Hi,
Go to: >Help>Help Contents>DAVE Apps>FLASH002[1.0.8]...
BR,
Zain
Go to: >Help>Help Contents>DAVE Apps>FLASH002[1.0.8]...
BR,
Zain
Not applicable
Jul 25, 2014
12:19 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 25, 2014
12:19 PM
Thank you!