Banner_Gate_Driver Banner_Isolated_GateDriver Banner_SOI_Gate_Driver Banner_Low_Side_Gate_Driver Banner_Solutions_for_Gate_Driver_and_power_switches


infineon4engi@twitter twitter

infineon4engineers Facebook

infineon@linkedin linkedin

infineon@youtube youtube


+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    New Member New Member AndreaC is on a distinguished road
    Join Date
    Apr 2019
    Posts
    2
    Points
    22.5

    calculating the shunt value for 10 Arms drive using IGCM20F60GA

    Hello all,

    I'm using the CIPOS to drive an AC motor and my target is to reach 10 Arms phase motor current.

    I set the shunt resistors are 0.03 Ohm.

    after few seconds the temperature of the shunt is 150 C because the power on each resistor is 3 W.

    Please could you indicate a typical value of shunt resistor for reaching 10 Arms current on the load?

    Thanks

  2. #2
    Beginner
    Infineon Employee
    Infineon Employee
    Expert
    Emanuel is on a distinguished road
    Join Date
    Nov 2018
    Location
    Munich
    Posts
    8
    Hi AndreaC,

    please have a look at the application note: AN2016-12 from the CIPOS IGCM20F20FA webpage, under application notes.
    There you get an idea on how to calculate the shunt resistor and what our application engineer used for the reference design.
    For the shunt, we generally recommend high power SMD components to be bused in order to reduce the stray inductance. This are available from different manufacturers of passive components.
    More information can be found under www.infineon.com/gatedriver
    Please contact our Technical Assistance Center for further inquiries

Tags for this Thread

Disclaimer

All content and materials on this site are provided as is. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.