Gate drivers

[Gyro Gearloose]

What gate drivers can be used for CoolSiC mosfet devices?

[SiCguru]

CoolSiC MOSFETs are fast-switching AND high-voltage devices, whose common mode transients (CMT) can reach and exceed 50 V/ns. Higher switching speed requires higher gate drive current as well as well-matched delays and accurate timing.
CoolSiC MOSFETs may need a negative gate voltage or a Miller clamp. In addition, CoolSiC MOSFETs may need faster short-circuit protection as their short-circuit withstand time is smaller than with traditional IGBTs.
In case short-circuit capability is not required, higher gate voltage may be utilized to reduce RDSon.

Furthermore you can find a table with the respective gate drivers on the web page under: https://www.infineon.com/cms/en/prod...d-gate-driver/

[Fränce]

Hi,
you mentioned the accurate timing in the gate driver. Why is this important?

Thanks!
Fränce

[electricuwe]

Hi,

the accurate timing is especially important when you are using high switching frequencies. If there are to large tolerances in timing this will require large deadtime/interlock delay time, which has negative impact on the control design. Furthermore large deadtime will lead to longer body diode conduction time which has negative impact on efficiency (with both switches of a halfbridge provided with exactly matching gate signals, synchronous rectification will take place all the time).

Best regards,

electricuwe

[Olaf Bendix]

Hi,

the Infineon gate-driver you can find under following link: https://www.infineon.com/cms/de/prod...te-driver-ics/

If you scroll down a bit, you can find a big selection table. Here you can select corresponding your search options, like CooSic, Application, configuration,...

So far you click on the corresponding areas, you will find your gate-driver according to your whishes. Hope it helps

[diplo777]

thank you for sharing this. This is really helpful. party bus tampa

[bountifultreeservice]

Hi,

the Infineon gate-driver you can find under following link: https://www.infineon.com/cms/de/prod...te-driver-ics/

If you scroll down a bit, you can find a big selection table. Here you can select corresponding your search options, like CooSic, Application, configuration,...

So far you click on the corresponding areas, you will find your gate-driver according to your whishes. Hope it helps

Thanks for sharing this information. I don't know too much about gate driver ics. The linked you shared is helpful.

Thanks and keep good luck.

Ben,
bountifultreeremoval.com

[charlesshawntree]

IHow really important the accurate timing? I'm just curious, hope you can explain it to us.


-Shawnee Tree care Company

[nadalbay123]

Hi, i did not know much about the gate driver but after reading this and going through the comments, i am a bit more confident on the subject.

Thanks Dean @ Plasterers Bournemouth