Attachments are accessible only for community members.
Jun 05, 2013
07:30 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jun 05, 2013
07:30 PM
Hi all,
Due to strong request we had made a webserver example project base on IAR platform. This webserver has it's webpage stored in the XMC flash thus no SD card is needed.
Please kindly import this project into your IAR workspace and give this a try.
Setup procedures
1. Import webserver example project into IAR workspace.
2. Flash software into XMC4500 Hex board
3. Open a internet browser
4. Enter ip address: http://192.168.0.10
Good luck and have fun .....
Due to strong request we had made a webserver example project base on IAR platform. This webserver has it's webpage stored in the XMC flash thus no SD card is needed.
Please kindly import this project into your IAR workspace and give this a try.
Setup procedures
1. Import webserver example project into IAR workspace.
2. Flash software into XMC4500 Hex board
3. Open a internet browser
4. Enter ip address: http://192.168.0.10
Good luck and have fun .....
1 Reply
Not applicable
Apr 29, 2016
09:33 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Apr 29, 2016
09:33 AM
Hi Travis,
Do you have webserver example for IAR and run in the xmc4500 relax kit?
Thanks,
Ming
Do you have webserver example for IAR and run in the xmc4500 relax kit?
Thanks,
Ming