Jul 31, 2019
04:29 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 31, 2019
04:29 PM
I am trying to get values out of my tlv magnetic sensor
All the read registers(00 to 09) gives 0!!
I know that sensor enters powr down mode at first so there is no value for first few bytes but it should have some values for 07 to 09
All the read registers(00 to 09) gives 0!!
I know that sensor enters powr down mode at first so there is no value for first few bytes but it should have some values for 07 to 09
Labels
- Labels:
-
ispn:9401:1:0
-
l1:338:1:0
-
l2:2601:1:0
-
l3:353:1:0
1 Reply
Feb 25, 2022
04:16 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 25, 2022
04:16 AM
Hi @User15938,
> Kindly ensure that the circuit is made according to the datasheet (pg#10).
> Could you please configure the mode to one of the five below modes and try reading the registers? The reset value for reserved registers is device-specific, so maybe for this device, it is 0, and that's why the three reserved registers give 0.
• Fast mode
• Low-power mode
• Ultra-low-power mode
• Master Controlled Mode (MCM)
• Master controlled low-power mode
Thanks,
Ritwick