[SOLVED] .bsdl file for TLE987X family

Announcements

Webinar: Integrated solutions for smaller, simpler low-voltage motor control design.
Join the webinar to experience!

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
User17533
Level 1
Level 1
Dear all,

Where can I get BSDL files for TLE987x Family?
Need to test my board over boundary scan IEEE1149.1 standart in JTAG.

Thanks
Allan
0 Likes
4 Replies
Fiz
Moderator
Moderator
Moderator
First like received 50 replies posted 25 replies posted
Hi Allan,

I need to clarify with the experts for the boundary scans, if and how the files could be made available to you.

Best,
Fiz
0 Likes
User17533
Level 1
Level 1
Fiz wrote:
Hi Allan,

I need to clarify with the experts for the boundary scans, if and how the files could be made available to you.

Best,
Fiz


Hi Fiz,

Thank you for your reply. Our products are based on TLE987x family for motor drive control. We want to use boundary scan to test our products in order to make sure our products in safe.
0 Likes
Fiz
Moderator
Moderator
Moderator
First like received 50 replies posted 25 replies posted
Hello Allan,

unfortunately our product does not support the boundary scan after IEEE1149.1 JTAG standard.
Normally our costumers use their own code to the test PCB for flashing the device with their application code.
Some do also use ICT to test their board.

Best,
Fiz
0 Likes
User17533
Level 1
Level 1
Fiz wrote:
Hello Allan,

unfortunately our product does not support the boundary scan after IEEE1149.1 JTAG standard.
Normally our costumers use their own code to the test PCB for flashing the device with their application code.
Some do also use ICT to test their board.

Best,
Fiz


Thank you for you reply. I will discuss this issue with my supervisor.
0 Likes