infineon4engi@twitter twitter

infineon4engineers Facebook

infineon@linkedin linkedin

infineon@youtube youtube


+ Reply to Thread
Results 1 to 6 of 6
  1. #1
    New Member New Member LIJUN is on a distinguished road
    Join Date
    Jul 2019
    Posts
    4
    Points
    42.5

    quustion about BTN8962

    I have a porblem about BTN8962,I use two 8962 to turn on a moto,firgue:
    when i set in1=high,in2=low all inh =high ,but the moto not turn on ,whats the porblem?
    Last edited by LIJUN; Jul 13th, 2019 at 09:36 PM.

  2. #2
    New Member New Member LIJUN is on a distinguished road
    Join Date
    Jul 2019
    Posts
    4
    Points
    42.5
    I use a mcu to control the moto ,and the high level is 3.3V,the datasheet show the input high level should above 1.75V,right?

  3. #3
    New Member New Member LIJUN is on a distinguished road
    Join Date
    Jul 2019
    Posts
    4
    Points
    42.5
    PIN 4 AND PIN 8 should connect togather?

  4. #4
    New Member New Member LIJUN is on a distinguished road
    Join Date
    Jul 2019
    Posts
    4
    Points
    42.5
    OK,i think i find the false,the chip is dameged.

  5. #5

    Infineon Employee
    Infineon Employee
    Jing.N is on a distinguished road
    Join Date
    Jun 2018
    Posts
    42
    Yes, should be above 1.75V
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

  6. #6

    Infineon Employee
    Infineon Employee
    Jing.N is on a distinguished road
    Join Date
    Jun 2018
    Posts
    42
    Ok. Good Luck
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.