quustion about BTN8962

Announcements

From sunburn to sun earn – we’ve got the power! Watch our #poweringgreen videos now.

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
User17500
Level 1
Level 1
First question asked First reply posted
I have a porblem about BTN8962,I use two 8962 to turn on a moto,firgue:
when i set in1=high,in2=low all inh =high ,but the moto not turn on ,whats the porblem?
0 Likes
5 Replies
User17500
Level 1
Level 1
First question asked First reply posted
I use a mcu to control the moto ,and the high level is 3.3V,the datasheet show the input high level should above 1.75V,right?
0 Likes
User17500
Level 1
Level 1
First question asked First reply posted
PIN 4 AND PIN 8 should connect togather?
0 Likes
User17500
Level 1
Level 1
First question asked First reply posted
OK,i think i find the false,the chip is dameged.
0 Likes
JingN
Moderator
Moderator
Moderator
First like received First solution authored 25 replies posted
Yes, should be above 1.75V
0 Likes
JingN
Moderator
Moderator
Moderator
First like received First solution authored 25 replies posted
Ok. Good Luck
0 Likes