Jul 12, 2019
03:32 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 12, 2019
03:32 PM
Hi,
I'm very new to D2G. Can anyone help/guide me on
(1) to change FMCW chirp direction - currently 'up chirp only'. I would like to test on triangular chirp - 'up/down chirp (first up)'
(2) to change the min RF frequency - so that it will not start at 24.025 GHz (eg. 24.08 GHz).
Current firmware .hex only allows 'up chirp' direction & min RF frequency already preset.
Many thanks.
I'm very new to D2G. Can anyone help/guide me on
(1) to change FMCW chirp direction - currently 'up chirp only'. I would like to test on triangular chirp - 'up/down chirp (first up)'
(2) to change the min RF frequency - so that it will not start at 24.025 GHz (eg. 24.08 GHz).
Current firmware .hex only allows 'up chirp' direction & min RF frequency already preset.
Many thanks.
Solved! Go to Solution.
- Tags:
- IFX
1 Solution
Jul 22, 2019
02:29 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 22, 2019
02:29 AM
Hi,
Please download Infineon Toolbox from https://www.infineon.com/toolbox, then install the Distance2Go Kit, and download the latest released FW (IFX_D2G-HW-SW_V2.0.1)
Download then DAVE and go through the offred DAVE projects to change chirp, or frequency settings...
Best Regards,
Montassar.
Please download Infineon Toolbox from https://www.infineon.com/toolbox, then install the Distance2Go Kit, and download the latest released FW (IFX_D2G-HW-SW_V2.0.1)
Download then DAVE and go through the offred DAVE projects to change chirp, or frequency settings...
Best Regards,
Montassar.
3 Replies
Jul 22, 2019
12:47 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 22, 2019
12:47 AM
Hi,
please use the DAVE projects included in the Distance2Go package available via our Toolbox as a starting point.
You can find them in \Distance2Go SW\v2.0.0\Firmware_Software\DAVE project
You can change the chirp and frequency settings to your needs there.
please use the DAVE projects included in the Distance2Go package available via our Toolbox as a starting point.
You can find them in \Distance2Go SW\v2.0.0\Firmware_Software\DAVE project
You can change the chirp and frequency settings to your needs there.
Jul 22, 2019
02:29 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 22, 2019
02:29 AM
Hi,
Please download Infineon Toolbox from https://www.infineon.com/toolbox, then install the Distance2Go Kit, and download the latest released FW (IFX_D2G-HW-SW_V2.0.1)
Download then DAVE and go through the offred DAVE projects to change chirp, or frequency settings...
Best Regards,
Montassar.
Please download Infineon Toolbox from https://www.infineon.com/toolbox, then install the Distance2Go Kit, and download the latest released FW (IFX_D2G-HW-SW_V2.0.1)
Download then DAVE and go through the offred DAVE projects to change chirp, or frequency settings...
Best Regards,
Montassar.
Jul 23, 2019
06:53 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 23, 2019
06:53 AM
Thanks both - dagern & tinymanta
Manage to find the settings.. 😉
Manage to find the settings.. 😉