infineon4engi@twitter twitter

infineon4engineers Facebook

infineon@linkedin linkedin

infineon@youtube youtube


+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    New Member New Member Saurabhu13 is on a distinguished road
    Join Date
    May 2019
    Posts
    1
    Points
    15

    Unable to SET CCE bit of CAN register CCCR

    HI,

    I am working on TC387 AURIX microcontroller.

    During my CAN initialization, After setting my INIT bit to 1, when I try to set the CCE bit to 1, I am not able to do it.
    After each setting each INIT and CCE bit to 1, I have a while loop which move forward only if respective bit is set to 1.
    my INIT bit is able to set and my while loop code moves forward to set CCE bit, but is never able to move ahead of my CCE bit set while loop, i.e. my CCE bit is never getting set.
    Is CCE bit write protected? If yes, what is the procedure to make it write accessible? Also Is there any other register that need to be set for CAN before setting CCCR register (INIT and CCE bit)?

  2. #2
    New Member New Member Oinky is on a distinguished road
    Join Date
    Aug 2019
    Posts
    1
    Points
    20
    Hi Saurabhu13,
    first you have to switch on the "synchronous clock source" of CLKSEL[i] in the MCR, before you can modify the contents of the CCCR[i].

Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.