Banner_AURIX_Security-Solution Banner_AURIX_Security-Solution Banner_AURIX_Security-Solution


infineon4engineers Facebook

infineon@google+ Google+

infineon@linkedin linkedin

infineon4engi@twitter twitter

infineon@youtube youtube

+ Reply to Thread
Results 1 to 2 of 2

Thread: TC264 Factory Erased and FlsLoader_Write

  1. #1
    New Member New Member Sivakumar_M is on a distinguished road
    Join Date
    May 2019
    Posts
    4
    Points
    45

    TC264 Factory Erased and FlsLoader_Write

    On a new factory erased chip (TC264 BC), would it be possible to write to PFLASH through FlsLoader_Write without executing FlsLoader_Erase?

  2. #2
    Advanced Advanced
    Infineon Employee
    Infineon Employee
    MoD is on a distinguished road
    Join Date
    Feb 2012
    Location
    Munich
    Posts
    50
    Points
    904.375
    Maybe it is possible but not recommended. Before write you should make sure that the sector is already erased, by erasing the sector or by checking the sector via Verify Erased Logocal Sector. This is independent of the device state therefore this should be done every time you will write.
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

+ Reply to Thread

Tags for this Thread

Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.