Banner_AURIX_Security-Solution Banner_AURIX_Security-Solution Banner_AURIX_Security-Solution Banner_AURIX_Security-Solution


infineon4engineers Facebook

infineon@google+ Google+

infineon@linkedin linkedin

infineon4engi@twitter twitter

infineon@youtube youtube

+ Reply to Thread
Results 1 to 5 of 5

Thread: Unable to flash (.elf ) file

Hybrid View

  1. #1
    New Member New Member Aishwarya is on a distinguished road
    Join Date
    Apr 2019
    Posts
    4
    Points
    43.75

    Unable to flash (.elf ) file

    Hi ,

    I am using tc233 triboard . I try to flash (.elf) using usb to jtag cable through Hightec development platform , getting following error

    Message from component 'Tc2CoreTargIntf' :
    Can't connect target !

    Message from component 'Tc2CoreTargIntf' :
    Can't connect JTAG target.

    I am using FT232HL for this usb to jtag conversion . In one of the evaluation board for aurix TC-297 , they were using same IC FT2232H , its working well for Hightec platform.

    Please suggest some solution to resolve this issue to flash using usb.


    Thanks.

  2. #2
    Advanced Advanced
    Infineon Employee
    Infineon Employee
    MoD is on a distinguished road
    Join Date
    Feb 2012
    Location
    Munich
    Posts
    60
    Points
    1104.375
    With the FT232HL this will not work. You need such a device as interface: https://www.ehitex.de/en/accessories...miniwiggler-v3 or https://www.ehitex.de/en/accessories...iwiggler?c=120
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

  3. #3
    New Member New Member Aishwarya is on a distinguished road
    Join Date
    Apr 2019
    Posts
    4
    Points
    43.75
    Thank you.

  4. #4
    New Member New Member Aishwarya is on a distinguished road
    Join Date
    Apr 2019
    Posts
    4
    Points
    43.75
    Hi Sir,
    Our use case is USB programmable Controller module. So is it possible to use FT232H or FT2232H in our Controller module to program our infenion controller using USB?

  5. #5
    Advanced Advanced
    Infineon Employee
    Infineon Employee
    MoD is on a distinguished road
    Join Date
    Feb 2012
    Location
    Munich
    Posts
    60
    Points
    1104.375
    For programming you need an interface like this ones, only a single device is not possible:
    https://www.ehitex.de/en/accessories...miniwiggler-v3
    or
    https://www.ehitex.de/en/accessories...iwiggler?c=120
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

+ Reply to Thread
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.