infineon4engi@twitter infineon4engineers infineon@linkedin infineon@youtube
twitter Facebook Linkedin Youtube

+ Reply to Thread
Results 1 to 3 of 3

Thread: BGT24LTR11 maching structures

  1. #1
    Beginner Beginner unnabi is on a distinguished road
    Join Date
    Oct 2018

    BGT24LTR11 maching structures

    What's the BGT24LTR11N16's output impedance on TX and RX ports? It does not specify numerical value anywhere in datasheets, only specify matching structure in AN472. However, that matching structure only works with 0.250 mm board thickness (10 mil). How do I match this IC to 20 mil thick board?

  2. #2
    New Member New Member
    Infineon Employee
    Infineon Employee
    tinymanta is on a distinguished road
    Join Date
    Jan 2019
    Hi unnabi,

    Here below the OUTPUT impedance of the TX and the RX port:

    Click image for larger version

Name:	Capture.JPG
Views:	1
Size:	27.0 KB
ID:	3958

    The matching should be evaluated with an RF simulator.
    Way of matching for the TX (24GHz) transformation can be done with a MS taper and a quarter wavelength transformation, or via a MS taper and a 50 Ohm line + distributed GND cap (dine in AN472)

    Last edited by tinymanta; Apr 23rd, 2019 at 05:43 AM.
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

  3. #3
    New Member New Member Jhon is on a distinguished road
    Join Date
    Dec 2017
    Dear Montassar:

    According to the matching structure for the TX and RX port in AN472 Fig13, I made a simulation with ADS. For the TX port, the ADS schematic is:

    Click image for larger version

Name:	TX.png
Views:	3
Size:	134.8 KB
ID:	4006

    The TX port-impedance calculated with zin is about 116 + j0 ohm, and RX is about 112+j34.5, which are quite different with the values in your post.

    What is the problem with my ADS model?

    Last edited by Jhon; Jun 14th, 2019 at 11:27 PM.

+ Reply to Thread

Tags for this Thread


All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.

Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.

Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.