+ Reply to Thread
Results 1 to 5 of 5

Thread: FOC wind mill start

  1. #1
    Beginner Beginner justin.lee is on a distinguished road
    Join Date
    Dec 2015
    Posts
    9
    Points
    60

    FOC wind mill start

    Hi

    How we can starting motor at wind mill status.

    Now I was try to it, but it is not easy.

    Even if found sector and current rpm at this status, it can not be

    operating smoothly.

    Is there any doc or example code??

    Would you check this one??

  2. #2
    Intermediate Intermediate
    Infineon Employee
    Infineon Employee
    pestadieu is on a distinguished road
    Join Date
    Sep 2018
    Posts
    20
    Points
    250
    Dear Justin Lee,

    Thanks a lot for your question. We are currently working on this topic.

    Best Regards,
    Paul
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

  3. #3
    Beginner Beginner justin.lee is on a distinguished road
    Join Date
    Dec 2015
    Posts
    9
    Points
    60
    Thanks for your support.

    I have two question.

    1. How is the release schedule?

    2. When it is release then Can I get via KEIL example pack? or
    Do I need contact Distributor?

    Thanks.

  4. #4
    Moderator
    Infineon Employee
    Infineon Employee
    Fiz is on a distinguished road
    Join Date
    Jun 2019
    Posts
    25
    Hi Justin,

    when there will be new packs released for the TLE987x you can get them directly via Keil.

    Best,
    Fiz
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

  5. #5
    Moderator
    Infineon Employee
    Infineon Employee
    Fiz is on a distinguished road
    Join Date
    Jun 2019
    Posts
    25
    Hello Justin,

    Unfortunately the windmill function is not implemented in the current FOC Algorithm.
    The Demo code focuses on the motor control only.

    Currently it is not planned to implement further application specific functions into the demo algorithm, but
    the Block commutation example code has a functionality where it re-synchronizes to the rotating motor.

    Best,
    Fiz
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

+ Reply to Thread
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.