infineon4engineers Facebook

infineon@google+ Google+

infineon@linkedin linkedin

infineon4engi@twitter twitter

infineon@youtube youtube

+ Reply to Thread
Results 1 to 3 of 3

Thread: Doubt in ICE1HS01G Controller

  1. #1
    New Member New Member Garbuli is on a distinguished road
    Join Date
    Mar 2019
    Posts
    2
    Points
    35

    Doubt in ICE1HS01G Controller

    Hi there!

    I have a doubt in the controller ICE1HS01G.

    In case of output short circuit of the converter, the sample of current in pin 2 will be more than 1,6V and the controller will turn off.

    After this, the only way to restart it is turn off and turn on the power supply??

    I am working in a SMPS design for telecom, and sometimes the consumer will put the output cables in short circuit... so, the smps must be able to support this condition.

    Sincerelly.

    Marcelo

  2. #2
    Administrator Bernd Brachmann is on a distinguished road Bernd Brachmann's Avatar
    Join Date
    Oct 2011
    Posts
    47
    The ICE1HS01G controller is not recommended for new design, you should change to ICE1HS01G-1.
    The current sense pin 2 is sensing the transformer winding voltage. In case the transformer is shorted the controller will latched off. The output short circuit protection works via pin FB (feedback). This is described in the application note for the 200W 24V 6A & 12V 5A SMPS demonstrator with ICE1HS01G-1 section 10.6. The overcurrent protection is described in section 10.4. You will also find some oscilloscope screenshots.

  3. #3
    New Member New Member Garbuli is on a distinguished road
    Join Date
    Mar 2019
    Posts
    2
    Points
    35
    Hi Bernd. Thanks for the reply.
    I checked here and i am alread using the ICE1HS01G-1.
    In my application, the latch off of the controller is not good. I need that in case of output short circuit, the controller reset and start again.
    I am using it in smps for telecom systems in 48Vdc, in a system with 4 rectifiers in parallel.
    When i put one rectifer, all works ok, but when i put the second rectifier in parallel, the output capacitor filters of this second unit has the behavior of a short circuit, turning off the first rectifier.
    Another problem is that here in Brazil, we have a standard that inform the necessity of capacity of output short circuit and automatic restart when the short circuit is removed.
    Is there a way to solve this or i need another controller?
    Sincerelly
    Marcelo

+ Reply to Thread

Tags for this Thread

Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.