infineon4engineers Facebook

infineon@google+ Google+

infineon@linkedin linkedin

infineon4engi@twitter twitter

infineon@youtube youtube

+ Reply to Thread
Results 1 to 2 of 2

Thread: 6EDL04N02PR enable input

  1. #1
    Intermediate Intermediate amanning will become famous soon enough
    Join Date
    Oct 2015
    Posts
    94
    Points
    255.78125

    6EDL04N02PR enable input

    In a motor control design I am using the 6EDL04N02PR gate driver IC. The motor control software is working well and nearly finished, so far so good.
    Yesterday I implemented a safety feature to disable the driver in case the motor voltage gets too high during braking. This resulted in fireworks and smoke! The output FETs and gate driver were destroyed.

    Can the enable input be used to let the motor free wheel? Is it OK to re-enable the driver while the the motor is still turning? Do the 6 PWM inputs need to be synchronized to the enable input when enabled or disabled?

  2. #2
    Moderator
    Infineon Employee
    Infineon Employee
    Expert
    Srivatsa is on a distinguished road
    Join Date
    Apr 2018
    Location
    California
    Posts
    21
    The 6EDL04N02PR acts as per the input provided. All outputs are set to LOW, if EN is at LOW logic level. When EN is HIGH, the outputs are driven by the input. In the above case when enable is low, all the output FETs are in blocking state and they could have failed first due to over-voltage
    when the motor is free wheeling followed by the failure of the gate driver.

    Instead of using the EN pin for protection, you can try by switching OFF the high side FETs and keeping the low side FETs ON till the excess energy from the motor is released.

    OR use a DC bus break switch to eliminate DC-bus over voltage when the motor is driven in generating mode.
    More information can be found under www.infineon.com/gatedriver
    Please contact our Technical Assistance Center for further inquiries

+ Reply to Thread
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.