Feb 08, 2019
02:12 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 08, 2019
02:12 AM
Hello,
I am using XMC42 for a power circuit with a Micrium uC/probe user interface. When I enabled the pwm output, I am receiving the following message:
The microcontroller continues to work as I configured, but I am losing the micrium debugger connection which I need to control and monitor the board. Maybe this could be result of swtiching noise on pcb. I observed from DAVE-4 debug window for RSTSTAT register as 0xF.
Is there a way to overcome this? How can I prevent debugger from resetting?
I am using XMC42 for a power circuit with a Micrium uC/probe user interface. When I enabled the pwm output, I am receiving the following message:
The microcontroller continues to work as I configured, but I am losing the micrium debugger connection which I need to control and monitor the board. Maybe this could be result of swtiching noise on pcb. I observed from DAVE-4 debug window for RSTSTAT register as 0xF.
Is there a way to overcome this? How can I prevent debugger from resetting?
Labels
0 Replies