Hello,

I am using XMC42 for a power circuit with a Micrium uC/probe user interface. When I enabled the pwm output, I am receiving the following message:

Click image for larger version

Name:	17329.png
Views:	0
Size:	13.0 KB
ID:	3795

The microcontroller continues to work as I configured, but I am losing the micrium debugger connection which I need to control and monitor the board. Maybe this could be result of swtiching noise on pcb. I observed from DAVE-4 debug window for RSTSTAT register as 0xF.

Is there a way to overcome this? How can I prevent debugger from resetting?