Feb 07, 2019
02:17 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 07, 2019
02:17 AM
Dear Forum Member
![3421.attach 3421.attach](/t5/image/serverpage/image-id/36497iBB388D919BBB76B4/image-size/large?v=v2&px=999)
Can I assume that the RTC will update the mirror register in the SCU block. And I can check via the SCU or its register when an update has taken place.
After the update of the registers in the RTC, the values must be transferred to the mirror register. To transfer a byte at 32 kHz I need 250 μs,
If I didn't miscalculate This means that the entire transmission of the 4 Registers (32 Byte) takes about 4 ms. Can anyone confirm my assumptions and Then I can read it with full pheripheral
speed correctly?
Best regards,
Ebbe Sand
Can I assume that the RTC will update the mirror register in the SCU block. And I can check via the SCU or its register when an update has taken place.
After the update of the registers in the RTC, the values must be transferred to the mirror register. To transfer a byte at 32 kHz I need 250 μs,
If I didn't miscalculate This means that the entire transmission of the 4 Registers (32 Byte) takes about 4 ms. Can anyone confirm my assumptions and Then I can read it with full pheripheral
speed correctly?
Best regards,
Ebbe Sand
- Tags:
- IFX
0 Replies