Welcome to the Infineon Developer Community

Hi,

Looking at the latest ModusToolBox 3.2 I couldn't find an Ethercat Example for the board KIT_XMC48_RLX_ECAT_V2.1, is there any plan to port the Dave example to MTB as well?

Best Regards,

Marcelo Macedo - FAE at Neutronics

Quiero utilizar el modelo BTS5012.Quiero controla el encendido y apagado de distintas lámparas led y saber si este modelo es posible aplicarle un duty cycle del 50% en el pin IN atraves de un microcontrolador para atenuar la iluminación led .

Esta aplicación es segura para el buen funcionamiento del componente?

Hello,

I have an older treadmill with a faulty mosfet. Can you recommend an alternate as I can't find the original part?

Transistor MOSFET F30U60DN H18

tx

K

Hello Team,

I am LG India team,  

we are using I2C driver provided by Infineon team to LG Korea team,

in I2C driver, Cy_SCB_I2C_SlaveGetReadTransferCount( ) is available which Returns the number of bytes read by the slave since the last time Cy_SCB_I2C_SlaveConfigReadBuf() is called. 

we calling this function before Cy_SCB_I2C_SlaveConfigReadBuf().

but we found its not reading correct values.

could you test once share procedure to use.

Hello!

I have the following code that is not working. After first call of readRegister response is 0, after calling readRegister the second time, I receive the expected value. 
Can you please help? I must mention that my application is based on the Infineon SPI_CPU_TC334 training and I've also tried to change  spiMasterChannelConfig.channelBasedCs but I still don't receive the expected behavior.

I've also attached the source code for QSPI.
Thank you!

/**********************************************************************************************************************
 * \file Cpu0_Main.c
 * \copyright Copyright (C) Infineon Technologies AG 2019
 * 
 * Use of this file is subject to the terms of use agreed between (i) you or the company in which ordinary course of 
 * business you are acting and (ii) Infineon Technologies AG or its licensees. If and as long as no such terms of use
 * are agreed, use of this file is subject to following:
 * 
 * Boost Software License - Version 1.0 - August 17th, 2003
 * 
 * Permission is hereby granted, free of charge, to any person or organization obtaining a copy of the software and 
 * accompanying documentation covered by this license (the "Software") to use, reproduce, display, distribute, execute,
 * and transmit the Software, and to prepare derivative works of the Software, and to permit third-parties to whom the
 * Software is furnished to do so, all subject to the following:
 * 
 * The copyright notices in the Software and this entire statement, including the above license grant, this restriction
 * and the following disclaimer, must be included in all copies of the Software, in whole or in part, and all 
 * derivative works of the Software, unless such copies or derivative works are solely in the form of 
 * machine-executable object code generated by a source language processor.
 * 
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
 * WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT SHALL THE 
 * COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN 
 * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS 
 * IN THE SOFTWARE.
 *********************************************************************************************************************/
#include "Ifx_Types.h"
#include "IfxCpu.h"
#include "IfxScuWdt.h"
#include "QSPI_Config.h"
#include "Timers.h"

#define LED &MODULE_P00,5

IFX_ALIGN(4) IfxCpu_syncEvent g_cpuSyncEvent = 0;

volatile uint8 delay;
static unsigned char response = 0;

void core0_main(void)
{
    IfxCpu_enableInterrupts();
    
    /* !!WATCHDOG0 AND SAFETY WATCHDOG ARE DISABLED HERE!!
     * Enable the watchdogs and service them periodically if it is required
     */
    IfxScuWdt_disableCpuWatchdog(IfxScuWdt_getCpuWatchdogPassword());
    IfxScuWdt_disableSafetyWatchdog(IfxScuWdt_getSafetyWatchdogPassword());
    
    /* Wait for CPU sync event */
    IfxCpu_emitEvent(&g_cpuSyncEvent);
    IfxCpu_waitEvent(&g_cpuSyncEvent, 1);
    
    //init1msTimer();
    initQSPI2Master();
    initQSPI2MasterChannel();

    resetIMMU();
    selfTestIMMU();

    /*uint8 xGyro, yGyro, zGyro;*/
    while(1)
    {
        response = readRegister(WHO_AM_I, 0x00);
       // response = readRegister(WHO_AM_I, 0x00);
        //readIMMUAxis(&xGyro, &yGyro, &zGyro);
    }
}

Hello,

As you can see in the attached document, “Bidirectional CLLC” is mentioned. I wonder that could you please send me the PLECS file OR could you please send me the document that shows how I can control CLLC when it is on the "forward and reverse mode conditions"?

Regards,

Mehmet

Hello,

As you can see in the attached document, “Bidirectional CLLC” is mentioned. I wonder that could you please send me the PLECS file OR could you please send me the document that shows how I can control CLLC when it is on the "forward and reverse mode conditions"?

Regards,

Mehmet

The Customer use Host SDK - CYPD6127 to motherboard that support thunderbolt feature.

Could you please give us VIF file?

thank you

你好，我之前看到一个帖子是关于SerialNumber的批量更改以及IMG文件的批量生成，我想询问一下这个windows批量更改文件应该如何使用？我点击之后它显示的是

（应用程序）

我执行上面的gen_images

返回的画面是：

不清楚其生成的img文件在哪，以及其应该如何使用。
>能否将详细步骤讲解一下呢？
>其中的readme也观看了，它说的是将exe文件后面加参数进行执行，那这个exe是通过windows终端进行打开吗？还是怎么操作才能让他打开的时候携带参数？
希望能够解答，谢谢