Banner_AURIX_Security-Solution Banner_AURIX_Security-Solution Banner_AURIX_Security-Solution Banner_AURIX_Security-Solution


+ Reply to Thread
Results 1 to 3 of 3

Thread: PWM Generation using STM for TC39x series

  1. #1
    New Member New Member saswat16 is on a distinguished road
    Join Date
    Dec 2018
    Posts
    2
    Points
    37.5

    PWM Generation using STM for TC39x series

    Hello,

    I need to generate PWM at user defined frequency using STM without using interrupt for TC39x series.
    As I am new to TC39x series I am unable to find proper way to implement.

    Kindly help

    Thanks in advance

  2. #2
    Advanced Advanced cwunder is on a distinguished road
    Join Date
    Feb 2015
    Location
    USA
    Posts
    108
    Points
    2037.5
    Your request seems impractical as the STM is not directly connected to a port pin.

  3. #3
    New Member New Member saswat16 is on a distinguished road
    Join Date
    Dec 2018
    Posts
    2
    Points
    37.5
    Hello Cwunder,

    That's true, but in my case I just want to compare the STM value and accordingly toggle the Port pin. But I am unable to understand the STM tick calculation, I mean to say how to load different tick value so that I can use for generation of different duty cycle.

    Thanks in advance

+ Reply to Thread
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.