Dec 13, 2018
12:05 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dec 13, 2018
12:05 AM
Hi all,
Selecting the right Evaluation Board is important in the pre-development stage. Unfortunately, I am new to the Motor Driver and controller area. My plan is to develop a motor controller for a BLDC motor (48V, 5KW) for Automotive Application. Since the output current is very high, I am not finding the exact Eva. Board. But I am sure that, working on an Eva. Board with low power output can be used/ modified to my High Power application (Correct me if I am wrong!).
Can someone suggest me the an Evaluation board for BLDC motor? (I hope I can start working on this Evaluation Board and then change the circuitry to High Power in future)
The requirement for my original project is as given below:
Input : 40V- 48V
Motor : 5KW BLDC motor/ 3phase PMSM (4 quadrant operation)
Load : 130A max
Feedback sensor : Hall sensors, Current sensors, Temperature sensor
Control : Vector control or Sensorless FOC , 6 step methods (if I use Hall sensor)
Operating Frequency / PWM frequency : No Information
ROM / RAM /Flash requirement : No Information
Communication : LIN or CAN
Number of ADC channels : No information
Also, From readings, I was informed that ARM Cortex M4 would be a good choice as Microcontroller. What would be a better suggestion for a Microcontroller (Automotive Application)?
Any further information can be provided. (This is my first post in this community)
Thanks in advance.
BR
VPN
Selecting the right Evaluation Board is important in the pre-development stage. Unfortunately, I am new to the Motor Driver and controller area. My plan is to develop a motor controller for a BLDC motor (48V, 5KW) for Automotive Application. Since the output current is very high, I am not finding the exact Eva. Board. But I am sure that, working on an Eva. Board with low power output can be used/ modified to my High Power application (Correct me if I am wrong!).
Can someone suggest me the an Evaluation board for BLDC motor? (I hope I can start working on this Evaluation Board and then change the circuitry to High Power in future)
The requirement for my original project is as given below:
Input : 40V- 48V
Motor : 5KW BLDC motor/ 3phase PMSM (4 quadrant operation)
Load : 130A max
Feedback sensor : Hall sensors, Current sensors, Temperature sensor
Control : Vector control or Sensorless FOC , 6 step methods (if I use Hall sensor)
Operating Frequency / PWM frequency : No Information
ROM / RAM /Flash requirement : No Information
Communication : LIN or CAN
Number of ADC channels : No information
Also, From readings, I was informed that ARM Cortex M4 would be a good choice as Microcontroller. What would be a better suggestion for a Microcontroller (Automotive Application)?
Any further information can be provided. (This is my first post in this community)
Thanks in advance.
BR
VPN
- Tags:
- IFX
0 Replies