infineon4engi@twitter infineon@linkedin infineon4engineers infineon@youtube
twitter Facebook Linkedin Youtube

+ Reply to Thread
Results 1 to 1 of 1

Thread: Memtool does not connect with XE166

  1. #1
    New Member New Member svro is on a distinguished road
    Join Date
    Nov 2018

    Memtool does not connect with XE166


    I am trying to connect Memtool 4.7 with a XE166 to program it with a new Software.
    I do receive always the same error message from memtool:

    "Message from component 'IMTMemtool' :
    Can't connect to Target

    Message from component 'MiniMonTargIntf' :
    Failed to create connection failed report !

    Message from component 'MiniMonTargIntf' :
    Can't connect target !

    Message from component 'MiniMonTargIntf' :
    Bootstrap loader not responding !
    Please check:
    - Target power supply
    - Communication cable
    - Communication settings"

    Targetdevice has power and the cable should not be a problem either because its used for other communications without any problem.
    The Pin-settings on the board match the specification for connecting with ASC Bootstrap Loader as mentioned in Infineons manuals, the software settings of memtool should be ok, too, but i think they do not come in to play as the error happens before they are used:.

    I have watched the data-transmission between PC and Device. Memtool sends a proper zero-byte with start- and ending-bit but the XE166 does not respond with the 0xD5. Itīs responding with 0xC9 which might be a problem for memtool because it canīt verify it as correct code and does not have it as error-code either.
    Maybe somebody can help and tell what this respond means or where I can find a list of error-respond-codes so I can look my error code up.

    Oh, and of course I tried with different boards of the same kind. After the fifth board with the same beavhiour I am pretty sure it is no broken Hardware.

    Thanks in Advance.

    Might be relevant: I tried new boards only
    Last edited by svro; Nov 27th, 2018 at 05:36 AM. Reason: Adding possible relevant information

+ Reply to Thread

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.

Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.

Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.