Nov 26, 2018
04:38 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Nov 26, 2018
04:38 AM
Hello to administrator of infineon:
recently,i use XMC4500 on a board designed by ourselves.
I can download my program based on your RTOS system code and it runs correctly .
however when i power up without connecting the ethernet cable ,the program seems choked in somewhere,
because the system cannot light up even a LED light on the board or cannot ping through by computer.
Well, i have been testing for a week by simple split the FTP SERVER APP into two parts FAFT_INIT & ETH_LWIP _INIT,
and it doesn't work, personally i think there should be deep problem with ETH_LWIP,
since it is the key to initialize the system configuration correctly.
Crucially, after a hardware reset signal to the MCU, everything is back to normal !!!
Frustrate by this problem, my project hit a bottleneck.
Sincerely, i hope someone could give some advice or discussion for me.
My project code partly and my DAVE configuration paste below.
Best regards,
DBking
recently,i use XMC4500 on a board designed by ourselves.
I can download my program based on your RTOS system code and it runs correctly .
however when i power up without connecting the ethernet cable ,the program seems choked in somewhere,
because the system cannot light up even a LED light on the board or cannot ping through by computer.
Well, i have been testing for a week by simple split the FTP SERVER APP into two parts FAFT_INIT & ETH_LWIP _INIT,
and it doesn't work, personally i think there should be deep problem with ETH_LWIP,
since it is the key to initialize the system configuration correctly.
Crucially, after a hardware reset signal to the MCU, everything is back to normal !!!
Frustrate by this problem, my project hit a bottleneck.
Sincerely, i hope someone could give some advice or discussion for me.
My project code partly and my DAVE configuration paste below.
Best regards,
DBking
2 Replies
Nov 30, 2018
10:46 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Nov 30, 2018
10:46 AM
Hi,
Please update to the latest version of the APPs. The issue you mention has been fixed in ETH_LWIP latest version.
Regards,
Jesus
Please update to the latest version of the APPs. The issue you mention has been fixed in ETH_LWIP latest version.
Regards,
Jesus
Nov 30, 2018
05:36 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Nov 30, 2018
05:36 PM
very nice of your reply, should i update DAVE to get the latest version or simply download it from your website?
Anyway, i will try this day, thank you !
Anyway, i will try this day, thank you !