[SOLVED] SSC Communication at 10MBaud

Announcements

Webinar: Integrated solutions for smaller, simpler low-voltage motor control design.
Join the webinar to experience!

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
User16111
Level 1
Level 1
Hi,

I want to communicate via SSC between the TLE9879 EvalKit and an angle sensor, the TLE5012B (max 8Mbit/s SSC).

I tried and the TLE9879 (Master) cannot received the data from TLE5012B (Slave) at 10Mbaud. The Master cannot receive the data from the Slave because of a Phase Error.

Could you please tell me why the Phase Error is reported and how to fix it?
0 Likes
1 Reply
lock attach
Attachments are accessible only for community members.
pestadieu
Employee
Employee
Hi,

Please find below an example for a 10 Mbaud connection via SSC using two TLE9879 EvalKit:


Especially at higher baud rates, it is necessary to ensure a proper initialization, otherwise wrong data can be latched and complete communication is disturbed.

Kind regards
0 Likes