infineon4engineers Facebook

infineon@google+ Google+

infineon@linkedin linkedin

infineon4engi@twitter twitter

infineon@youtube youtube

+ Reply to Thread
Results 1 to 5 of 5

Thread: Tricore TC1782 GPT Pins

  1. #1

    Tricore TC1782 GPT Pins

    Hello there.
    I have been trying to read TC1782 on-board and trying to figure out which pins could be GPT S1 and GPT S2 on MCU?
    Any help from you guys will be highly appreciated.
    Its Infineon Tricore K-TC1782N-320 F180HL
    I have got its datasheet and pinout description but unable to identify proper GPT pins from them.
    Kindly guide me on this...

    Thank you.

  2. #2
    Advanced Advanced cwunder is on a distinguished road
    Join Date
    Feb 2015
    Location
    USA
    Posts
    63
    Points
    1077.5
    I am not sure what pins you are referring too? What port pins are "GPT S1" and "GPT S2"?

  3. #3
    Can you help me with BSL to read this MCU on-board?

  4. #4
    Advanced Advanced cwunder is on a distinguished road
    Join Date
    Feb 2015
    Location
    USA
    Posts
    63
    Points
    1077.5
    Which BSL mode are you using on the TC1782?

    The BSL mode is dependent on pins P0[7:0].

    After any device start the currently valid start-up configuration is indicated in bitfield HWCFG of register SCU_STSTAT
    After any system reset values upon the rising reset-edge (SCU_STSTAT.LUDIS=0) configuration pins P0[7:0] are latched

    The two most common are listed below (see the manual for more information)
    HWCFG[7:0]
    010xxxx0B Bootstrap Loader Mode, Generic Bootloader at CAN pins
    10101xx0B Bootstrap Loader Mode, ASC Bootloader

    Then you need to follow the defined protocol for the respective mode you have chosen.

    :

  5. #5
    Quote Originally Posted by cwunder View Post
    Which BSL mode are you using on the TC1782?

    The BSL mode is dependent on pins P0[7:0].

    After any device start the currently valid start-up configuration is indicated in bitfield HWCFG of register SCU_STSTAT
    After any system reset values upon the rising reset-edge (SCU_STSTAT.LUDIS=0) configuration pins P0[7:0] are latched

    The two most common are listed below (see the manual for more information)
    HWCFG[7:0]
    010xxxx0B Bootstrap Loader Mode, Generic Bootloader at CAN pins
    10101xx0B Bootstrap Loader Mode, ASC Bootloader

    Then you need to follow the defined protocol for the respective mode you have chosen.

    :
    Thank you for your understandings and reply.
    I request you to please visit this post made by me in reference to my query.
    I need BSL and pinouts for this specific module.
    Kindly help me.

    https://www.infineonforums.com/threa...ricore-1782%29


    Waiting for your reply.
    Thanks

+ Reply to Thread

Tags for this Thread

Disclaimer

All content and materials on this site are provided as is. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.