infineon4engineers Facebook

infineon@google+ Google+

infineon@linkedin linkedin

infineon4engi@twitter twitter

infineon@youtube youtube

+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 12 of 12

Thread: AURIX 26X interrupt and timer confuration

  1. #11
    Advanced Advanced cwunder is on a distinguished road
    Join Date
    Feb 2015
    Location
    USA
    Posts
    63
    Points
    1077.5
    If you are using a kernel (RTOS) then most likely the system timer is used as the scheduler (based on the kernel tick time, for example 1 msec).

    The system timer discussion in this thread is applicable but it assumes you have full control of the TC26x resources.

    When you are using an RTOS you need to know how to configure the kernel tick time and how to create a task with the correct parameters.

    In my opinion that should be another thread. Here you asked how to configure the system timer and this has been explained.

  2. #12
    New Member New Member kanch is on a distinguished road
    Join Date
    Nov 2018
    Posts
    8
    Points
    80
    Do you mean that stm ticks are kernel tick..?
    i have doubt related to STM itself that i had calculated values of MSIZE and MSTART due to which i was able to run the function of 100ms in 6 to 7 sec which was taking 42sec initially.
    but still 6 to 7 sec is more time taken logically to run task of 100 msec.
    is this the correct way to alter and reduce the time?

    Thanks in advance.

+ Reply to Thread

Tags for this Thread

Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.