infineon4engineers Facebook

infineon@google+ Google+

infineon@linkedin linkedin

infineon4engi@twitter twitter

infineon@youtube youtube

+ Reply to Thread
Results 1 to 2 of 2

Thread: Getting Responce 0x01 from Iridium SLB9670 TPM 2.0 Chip with NXP5748G DEVKIT

  1. #1
    New Member New Member yogeshrt is on a distinguished road
    Join Date
    Nov 2018
    Posts
    1
    Points
    15

    Getting Responce 0x01 from Iridium SLB9670 TPM 2.0 Chip with NXP5748G DEVKIT

    Hardware Setup:
    Infineon Iridium SLB 9670 TPM 2.0 interface with NXP MPC5748G via SPI
    Software Setup:
    S32 IDE with FreeRTOS

    we have connected NXP MPC5748G as a master and Iridium SLB 9670 TPM 2.0 as a slave.
    Connection are as below mentioned:

    NXP MPC5748G Iridium SLB 9670 PIN
    MOSI 19
    MISO 21
    CLK 23
    Chip selc 26
    Vcc (3.3 V) 1
    GND 6

    SPI specification:
    1. Baudrate 5000000
    2. Mode 0

    But we are facing following problems.
    1. We are not getting response as TPM_ACCESS_VALID(0x80) from SLB9670 in Startup-wait implementation
    2. Not getting vendor id for command TPM_DID_VID( 83 D4 0F 00 00 00 00 00 )

    Could you please share your comment on the above issues.
    Thanks in advance.

  2. #2
    New Member New Member Randy_Wang is on a distinguished road
    Join Date
    Nov 2018
    Posts
    1
    Points
    20
    Hi Yogeshry,
    I have the same issue as yours.
    I have connected NXP LS1043ARDB with Iridium SLB9670 in ubuntu16.04
    and can't get response 0x80 from TPM.
    if you have any solutions for it , please let me know.
    Thanks.

+ Reply to Thread

Tags for this Thread

Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.