Banner_AURIX_Security-Solution Banner_AURIX_Security-Solution Banner_AURIX_Security-Solution Banner_AURIX_Security-Solution


infineon4engineers Facebook

infineon@google+ Google+

infineon@linkedin linkedin

infineon4engi@twitter twitter

infineon@youtube youtube

+ Reply to Thread
Results 1 to 4 of 4

Thread: How to Read/Write FLASH and EEPROM of (Infineon Tricore 1782)

  1. #1
    New Member New Member smartkeyprogrammers is on a distinguished road
    Join Date
    Oct 2018
    Posts
    5
    Points
    47.5

    How to Read/Write FLASH and EEPROM of (Infineon Tricore 1782)

    Hello There,

    My purpose of this thread here, is to humbly ask about Reading/writing FLASH and EEPROM of Infineon Tricore 1782.
    I want to read it's complete memory and copies it to another MCU.

    In my case this MCU is installed on Honda Vezel's 2015-16, Transmission Control Module made by Continental, but unfortunately no programmer in my knowledge supports this specific TCM's reading through OBD or no pinout could be found by me so far..
    So I have to read it on board.

    Kindly guide me. How can I be able to read this MCU on-board?

    I am also attaching its Photos.Click image for larger version

Name:	IMG_25411.jpg
Views:	4
Size:	540.3 KB
ID:	3660Click image for larger version

Name:	IMG_2536.jpg
Views:	6
Size:	633.0 KB
ID:	3661Click image for larger version

Name:	IMG_2537.jpg
Views:	6
Size:	462.9 KB
ID:	3662Click image for larger version

Name:	IMG_2538.jpg
Views:	7
Size:	682.3 KB
ID:	3663Click image for larger version

Name:	IMG_2540.jpg
Views:	4
Size:	714.7 KB
ID:	3664

  2. #2
    New Member New Member smartkeyprogrammers is on a distinguished road
    Join Date
    Oct 2018
    Posts
    5
    Points
    47.5
    waiting for reply.. anyone?

  3. #3
    New Member New Member Aruna is on a distinguished road
    Join Date
    Aug 2019
    Posts
    1
    Points
    40
    Hello,

    As I interested in this matter, can you help me out?

    Do you have a pinout diagram or specific tool to use, a script perhaps.?
    If possible pal.

    Appriciate it.

  4. #4

    Flash read

    Reading the EEPROM is a matter of placing it in a suitable device programmer, it is just a serial EEPROM.
    Reading the FLASH is a different matter entirely, if the manufacturer did not disable reading of flash it may be possible to do it using a modified CANLoader via the CAN BOOT mode.
    See application note #32136

    Good luck finding the code listed in chapter 7.

+ Reply to Thread

Tags for this Thread

Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.