I have XMC1100 2Go and Presureshild 2go, 3D Megnetic sensor shield 2go and current sensor 2go, I want to connect it so I looked through the getting started guide of the sensor shileds. There I find the image

I doubt is it a right way? Cause if I connect as shown in the figure the correcponding pins will not match. Vss on XMC will connect with GND of pressure shild and CSBN with VDD and so on...

Click image for larger version

Name:	Capture.PNG
Views:	0
Size:	168.7 KB
ID:	3654