Sep 13, 2018
01:56 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 13, 2018
01:56 AM
Hello,
I want to expand the xmc4500 pins using Mcp23017 and have more ADC using the ADS7828, but when I try to send commands I can not communicate with the xmc via i2c. Do you have any suggestions? I used the guide provided by Infineon.
Thanks
I want to expand the xmc4500 pins using Mcp23017 and have more ADC using the ADS7828, but when I try to send commands I can not communicate with the xmc via i2c. Do you have any suggestions? I used the guide provided by Infineon.
Thanks
- Tags:
- IFX
1 Reply
Sep 13, 2018
05:04 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 13, 2018
05:04 AM
Hi,
I would suggest you to check the I2C examples written using either XMCLib (part of XMCLib downloadable package) only or using I2C_MASTER APP
(available via DAVE Project Library Manager or through following link: DAVE APP download site).
There you can find the examples of proper I2C initialization, configuration and communication.
Best regards,
Deni
I would suggest you to check the I2C examples written using either XMCLib (part of XMCLib downloadable package) only or using I2C_MASTER APP
(available via DAVE Project Library Manager or through following link: DAVE APP download site).
There you can find the examples of proper I2C initialization, configuration and communication.
Best regards,
Deni