Not applicable
Aug 15, 2018
10:36 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Aug 15, 2018
10:36 AM
Following the Quick guide for the Distance2Go kit. After lots of downloading... launched the Radar GUI app. The Distance2Go sensor is not being recognized. Seems to show up in the Windows Device Manager as a COM port.
The COM port dropdown list is empty. Is there some needed firmware on the device that is not loaded? Since nothing was showing, I loaded the Radar_D2G_FMCW.hex and still nothing. What am I missing here?
The COM port dropdown list is empty. Is there some needed firmware on the device that is not loaded? Since nothing was showing, I loaded the Radar_D2G_FMCW.hex and still nothing. What am I missing here?
1 Reply
Aug 30, 2018
05:24 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Aug 30, 2018
05:24 AM
May you please provide a screenshot of the device manager. Please be aware that the Distance2Go kit has 2 USB connectors as described in the Guide. The one going to the debugger part and that is used for flashing is not the one that works with the GUI.