XMC4500 Relax Kit only debug with USB, but not by JTAG/SWD Jlink

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Not applicable
Hello,

I can only program my board by USB, but I want to use Jlink because I already have the power on board.
In this board there is 2 processors and one for debug, may be it keep priority on debug.

So I connect it on the connector X5 but when I run the debug on DAVE, an error appear.

Connecting to J-Link...
J-Link is connected.
Firmware: J-Link V10 compiled Jul 23 2018 09:53:14
Hardware: V10.10
S/N: 50111665
Feature(s): GDB
Checking target voltage...
Target voltage: 3.04 V
Listening on TCP/IP port 2331
Connecting to target...ERROR: Could not find core in Coresight setup
ERROR: Could not connect to target.
Target connection failed. GDBServer will be closed...Restoring target state and closing J-Link connection...
Shutting down...
Could not connect to target.
Please check power, connection and settings.



I run Jlink.exe and try connected by connect

3205.attach

But still don't work.

If someone have an answer! Thank you.
0 Likes
1 Reply
User14803
Level 1
Level 1
MilouT wrote:
Hello,

I can only program my board by USB, but I want to use Jlink because I already have the power on board.
In this board there is 2 processors and one for debug, may be it keep priority on debug.

So I connect it on the connector X5 but when I run the debug on DAVE, an error appear.

Connecting to J-Link...
J-Link is connected.
Firmware: J-Link V10 compiled Jul 23 2018 09:53:14
Hardware: V10.10
S/N: 50111665
Feature(s): GDB
Checking target voltage...
Target voltage: 3.04 V
Listening on TCP/IP port 2331
Connecting to target...ERROR: Could not find core in Coresight setup
ERROR: Could not connect to target.
Target connection failed. GDBServer will be closed...Restoring target state and closing J-Link connection...
Shutting down...
Could not connect to target.
Please check power, connection and settings.



I run Jlink.exe and try connected by connect

3205.attach

But still don't work.

If someone have an answer! Thank you.


Hi Milou T,
Do you have solved it?I have some related questions.
But I can debug it by SWD, not JTAG.
I think that The TRST Pin must need pull up.
0 Likes