infineon4engineers

# Thread: [SOLVED] Questions about phase inductance and phase resistance in FOC Code

1. ## [SOLVED] Questions about phase inductance and phase resistance in FOC Code

Hi I have some questions about FOC.

In the example code, we know that we set the Phase Resistance to 0.36 ohm and the Phase Inductance to 0.0002H. And what motor was used was confirmed in Abstract.txt.

1. Is Phase Resistance the half of Line to Line Resistance?
2. Can I obtain the phase resistance value using the stator resistance value?
If I can get it, let me know how to get it.
3. I want to know how to obtain the value of phase inductance.
4. I want to know how to obtain phase inductance using direct axis inductance.

Regards,
Rocky

2. Hi Rocky,

The FOC democode is expecting the motor windings in a star connection.

1) Yes, the Phase resistance is half of the Line to Line resistance

2) There is no distinction between stator and rotor resistance value in the code

3) it is possible to measure the phase inductunce in several ways:
- measure it with a LCR-Meter
- Apply a 50% dutycycle PWM-pattern, measure di/dt with a current Probe and calculate L

4) For this point, I have to reference the literature: "Permanent Magnet Synchronous and Brushless DC Motor Drives" from Ramu Krishnan
On Page 35, he gives a hint:

- Generally, the ratio is in a range of 3
- Earlier in the book he writes Ld > Lq

My proposal is to start with this relations.

3. thank you for your kind reply

4. Originally Posted by Mc-Key
Hi Rocky,

The FOC democode is expecting the motor windings in a star connection.

1) Yes, the Phase resistance is half of the Line to Line resistance

2) There is no distinction between stator and rotor resistance value in the code

3) it possible to measure the phase inductunce in several ways:
- measure it with a LCR-Meter
- Apply a 50% dutycycle PWM-pattern, measure di/dt with a current Probe and calculate L

4) For this point, I have to reference the literature: "Permanent Magnet Synchronous and Brushless DC Motor Drives" from Ramu Krishnan
On Page 35, he gives a hint:

- Generally, the ratio is in a range of 3
- Earlier in the book he writes Ld > Lq

My proposal is to start with this relations.
and how to change this thread to [SOLVED]?

#### Bookmarks

##### Bookmarks
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.

Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.

Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.