Not applicable
Jul 26, 2018
11:01 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 26, 2018
11:01 PM
Hello at all,
I use the RTC App. To have an exactly RTC it is normal to select in the Standby Clock Generation Settings " External Crystal Low Power Oscillator" as RTC Clock Source.
If I set this, the controller will not start and will always hang on one point (see picture).
If I leave the other setting in the app everything works, but you have a big difference in the time, which you do not want.
Anyone has the same problem and can help me?
Regards
Patrick
I use the RTC App. To have an exactly RTC it is normal to select in the Standby Clock Generation Settings " External Crystal Low Power Oscillator" as RTC Clock Source.
If I set this, the controller will not start and will always hang on one point (see picture).
If I leave the other setting in the app everything works, but you have a big difference in the time, which you do not want.
Anyone has the same problem and can help me?
Regards
Patrick
1 Reply
Jul 27, 2018
02:20 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 27, 2018
02:20 AM
Hi,
Please have a look at https://www.infineonforums.com/threads/5035-Dave-applications-hangs-in-bool-XMC_SCU_CLOCK_IsLowPower...
We are releasing in the next weeks a new version of the XMCLib where this is going to be finally fixed.
Regards,
Jesus
Please have a look at https://www.infineonforums.com/threads/5035-Dave-applications-hangs-in-bool-XMC_SCU_CLOCK_IsLowPower...
We are releasing in the next weeks a new version of the XMCLib where this is going to be finally fixed.
Regards,
Jesus