Not applicable
Jul 25, 2018
01:49 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 25, 2018
01:49 AM
Hello
I am writing device drivers for GPT12 module for TC275T controller.
I tried to write by referring user manual, but still while modifying T3CON register, the controller is going to bus error loop. Also I cleared ENDINIT with password during T3CON modification, still its unable to write anything on that register. I have no idea what to do now.
I am new to Infineon. Anybody has working driver for it?
Thanks
Partha Sarathi Mishra
I am writing device drivers for GPT12 module for TC275T controller.
I tried to write by referring user manual, but still while modifying T3CON register, the controller is going to bus error loop. Also I cleared ENDINIT with password during T3CON modification, still its unable to write anything on that register. I have no idea what to do now.
I am new to Infineon. Anybody has working driver for it?
Thanks
Partha Sarathi Mishra
0 Replies