infineon4engineers Facebook

infineon@google+ Google+

infineon@linkedin linkedin

infineon4engi@twitter twitter

infineon@youtube youtube

+ Reply to Thread
Results 1 to 2 of 2

Thread: TC223 Starter Kit UART over DAP

  1. #1
    New Member New Member kpolak is on a distinguished road
    Join Date
    Jun 2018
    Posts
    1
    Points
    15

    TC223 Starter Kit UART over DAP

    HI All,

    I trying to find out if it's possible to have UART over DAP (external miniWiggler connected to board DAP port) in same way as it's achieved with on board miniWiggler.
    To be precise I want ot achieve setup on which I can communicate with board over virtual COM port provided by miniWiggler device (external).
    I can use on board miniWiggler in such configuration without problems but I have to switch to external one (connected via DAP port).

    Did anyone tired to configure UART over DAP for TriCore Starter Kit boards? Is this even possible?

    Best Regards,
    Konrad

  2. #2
    New Member New Member
    Infineon Employee
    Infineon Employee
    MoD is on a distinguished road
    Join Date
    Feb 2012
    Location
    Munich
    Posts
    15
    Points
    159.375
    Any UART over DAP don't exist. The miniWiggler and also the on board wiggler are using an FTDI device with 2 channels. 1 channel is used for DAP/JTAG the other one for UART. On board there is a direct Connection of channel 2 to an ASC.
    In case of using external miniWiggler this is also possible if the system has assembled the 20 pin Automotive JTAG connector and pins 18 and 20 are connected to ASC of the device. If not you must made a Connection of this 2 pins to your ASC. Please see also AP56004 for the pinning of the connector.
    The views expressed here are my personal opinions, have not been reviewed or authorized by Infineon and do not necessarily represent the views of Infineon.

+ Reply to Thread
Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.