Jul 02, 2018
08:33 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jul 02, 2018
08:33 AM
The IFX007T is an integrated high current half bridge for motor drive applications. It is part of the Industrial & Multi Purpose NovalithIC™ family containing one p-channel high-side MOSFET and one n-channel low-side MOSFET with an integrated driver IC in one package. Due to the p-channel high-side switch the need for a charge pump is eliminated thus minimizing EMI. Interfacing to a microcontroller is made easy by the integrated driver IC which features logic level inputs, diagnosis with current sense, slew rate adjustment, dead time generation and protection against overtemperature, undervoltage, overcurrent and short circuit. The IFX007T provides a cost optimized solution for protected high current PWM motor drives with very low board space consumption.
Visit us @:
Product overview:
https://www.infineon.com/cms/en/product/power/motor-control-ics/intelligent-motor-control-ics/single...
Demoboard:
https://www.infineon.com/cms/en/product/power/motor-control-ics/intelligent-motor-control-ics/single...
Example code:
https://github.com/Infineon/IFX007T-Motor-Control
Visit us @:
Product overview:
https://www.infineon.com/cms/en/product/power/motor-control-ics/intelligent-motor-control-ics/single...
Demoboard:
https://www.infineon.com/cms/en/product/power/motor-control-ics/intelligent-motor-control-ics/single...
Example code:
https://github.com/Infineon/IFX007T-Motor-Control
Labels
- Tags:
- IFX
1 Reply
Dec 20, 2018
04:58 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dec 20, 2018
04:58 AM
Is it possible to use the INH-Input (Inhibit) to supply a PWM-signal? Otherwise (PWM on IN) the BDC-motor will be shortened during PWM-off.
Thanks for an answer.
Wilhelm
Thanks for an answer.
Wilhelm