Hi all,

I have configerated an IO ports as external interrupt source and have used the IO002 App (DAVE-3).
The signal is connected via a EUR001 instance to the NVIC.

Click image for larger version

Name:	DAVE3_External_Interrupt.jpg
Views:	0
Size:	10.2 KB
ID:	3508

In ERU001 App I can configurate the Event Trigger Logic with e.g. "falling edge" detection, but my Software will also trigger the external signal on the rising edge!
Have someone seen the same behaivour with DAVE3 or have you any ideas, how I can fix this Problem?

Thanks in advance,