Featured Discussions
Hello,
I see the build warning as below in the latest MTB 3.2 version. Is this an issue that can be fixed by Infineon or else it is upto the ARM?
-I../mtb_shared/wifi-host-driver/release-v3.1.0/WiFi_Host_Driver/src/include -I../mtb_shared/wpa3-external-supplicant/release-v1.1.0/include -I../mtb_shared/wpa3-external-supplicant/release-v1.1.0
../mtb_shared/mbedtls/mbedtls-2.25.0/library/ssl_tls.c: In function 'ssl_calc_finished_tls_sha384':
../mtb_shared/mbedtls/mbedtls-2.25.0/library/ssl_tls.c:3267:5: warning: 'mbedtls_sha512_finish_ret' accessing 64 bytes in a region of size 48 [-Wstringop-overflow=]
3267 | finish( &sha512, padbuf );
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Regards,
Karthik
Show LessHello,
We are using 1YN - CYW43439 with CYW4343A2_001.003.016.0031.0000.1YN.hcd firmware. We are experiencing the following error when we connect multiple Android devices.
[DEL] Device 75:52:F2:2E:99:A8 Galaxy M33 5G
[7F-40-50-E7-88-6C]# [ 4455.602130] Bluetooth: hci0: command 0x2006 tx timeout
[ 4457.682230] Bluetooth: hci0: command 0x200a tx timeout
[ 4459.762186] Bluetooth: hci0: command 0x2006 tx timeout
We tried the following but didn't help:
echo 0 > /sys/class/rfkill/rfkill0/state
echo 1 > /sys/class/rfkill/rfkill0/state
The problem is only solved when we reboot the system. Is there any other solution to this timeout problem such as reloading the device firmware? Can we force reload the firmware using `hcitool`?
Thanks for all the help!
Mesih
Show LessHello,
I am using the BLDC shield TLE9879 with Arduino through Arduino IDE, to simply drive a BLDC motor with the HALL mode.
Is it possible to have access to the speed/current measurements from the TLE9879 through arduino?
Should i use Keil through a J-link to modify TLE9879? Or something similar?
We have a custom board in which we are using PMIC consisting of IRPS5401MTRBF chip, to get knowledge about this we have ordered EVAL_PS5401-25A (EVK Board)
We are using PowIRCenter Build Tool for configuring EVK board, we are connecting the EVK board to Host PC with USB005 V1.0. We have followed the instructions from PowIRCenter tool User guide we have device (Rocky Family) and selected target board.
We had configured using EVK board user guide and input voltage for all four switchers (A, B, C, D) and LDO is 5V. In the configuration of PM Bus status, we are seeing some error as shown in image below, we want to know whether we should change anything in configurations to remove those errors.
when we are not able to get excepted output (voltage values) as shown in image below these values are generating only when we are writing into the OTP memory (user section 26 OTP's)
And in the configurations, we have observed that Input voltage is taking as 12V, but in configuration I had given 5Vin.
Could anyone forward a default configuration file where we can see the excepted output, and let me know how to write an
output into the register directly by giving any detailed user guide.
Thanks & Regards
Navin
Show LessI have a CYBT-343026-01 module and I want to connect a speaker and want to play the sound using CYBT-343026-01 module with the help of Audio_headset app and Audio_watch app. so is there any way to connect audio speaker and play them using CYBT-343026. if any then please provide the help also please suggest any app, which can be build easily to play on CYBT-343026-EVAL board.
Show Lesszhege
smartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/%E6%99%BA%E8%83%BD%E7%94%B5%E6%BA%90%E5%BC%80%E5%85%B3/%E6%8E%A5%E5%9C%B0/td-p/723904
Show Lesssmartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/AIROC-%E8%93%9D%E7%89%99/CYW89829-%E4%B8%93%E7%94%A8ADC%E9%97%AE%E9%A2%98/td-p/723824
Show LessHello,
I am curious to know does IAR IDE, programmer tools support in Linux(Debian)OS.
I know its not a right forum to ask here.
It would be really helpful to know this.
Thanks
Kiran
Show Less