May 07, 2018
05:13 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
May 07, 2018
05:13 AM
Hi,
DAVE 4 provides an APP to obtain a PWM signal generated by a Space Vector Modulation (PWM_SVM). The APP Help mentions that it is suitable for XMC1302 but when implementing the example given in APP Help > Usage, there is no SV Modulation. After debugging there can be seen that the following function: void PWM_SVM_SVMUpdate ( PWM_SVM_t *const HandlePtr,uint16_t Amplitude,uint32_t Angle) there is no change in the entered amplitude and angle values.
Hope that anyone had the same problem and knows the solution.
Regards,
Aitor
DAVE 4 provides an APP to obtain a PWM signal generated by a Space Vector Modulation (PWM_SVM). The APP Help mentions that it is suitable for XMC1302 but when implementing the example given in APP Help > Usage, there is no SV Modulation. After debugging there can be seen that the following function: void PWM_SVM_SVMUpdate ( PWM_SVM_t *const HandlePtr,uint16_t Amplitude,uint32_t Angle) there is no change in the entered amplitude and angle values.
Hope that anyone had the same problem and knows the solution.
Regards,
Aitor
- Tags:
- dave4 pwm svm
- IFX
1 Reply
Jan 25, 2021
08:38 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Jan 25, 2021
08:38 AM
I'm having the same problem...any luck?