Not applicable
May 04, 2018
02:00 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
May 04, 2018
02:00 PM
Hello,
I am currently using an XMC1400 boot kit. I understand the concept of 'veneers'. The code at 0x00000000 is actually ROM and those entries have hard coded in them addresses to RAM which contain the actual
address of the interrupt handlers. The default linker script has the flash section starting at 0x10001000. I would like to reserve some space (maybe 64 bytes or so) ahead of this and start the flash area at 0x10001040. Changing the linker
script causes some sort of fault.
If this is achievable, what else am I missing?
Thanks
I am currently using an XMC1400 boot kit. I understand the concept of 'veneers'. The code at 0x00000000 is actually ROM and those entries have hard coded in them addresses to RAM which contain the actual
address of the interrupt handlers. The default linker script has the flash section starting at 0x10001000. I would like to reserve some space (maybe 64 bytes or so) ahead of this and start the flash area at 0x10001040. Changing the linker
script causes some sort of fault.
If this is achievable, what else am I missing?
Thanks
0 Replies