May 03, 2018
08:28 PM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
May 03, 2018
08:28 PM
Hello.. I'm using XMC4800 EtherCAT relax kit. I tried to debug in GDB Segger Jlink debugging but I got following errors.
JLinkGDBServerCL.exe
arm-none-eabi-gdb
semihosting and SWU
In console I got "Segger J-link GDB server v6.00d terminal output channel closed by the GDb server". So I couldn't debug in that mode.
But when I debugged in GDB microE debugging it worked fine. But I want to use GDB Segger J link debugging because in every documents related to XMC they have used the same. Please help
me to solve this issue.
In console I got "Segger J-link GDB server v6.00d terminal output channel closed by the GDb server". So I couldn't debug in that mode.
But when I debugged in GDB microE debugging it worked fine. But I want to use GDB Segger J link debugging because in every documents related to XMC they have used the same. Please help
me to solve this issue.
0 Replies