Apr 26, 2018
05:09 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Apr 26, 2018
05:09 AM
Hi.
I use the build in ASC BootStrapLoader and need to write a RAM-Code to handle a own Bootloader protocol over the USIC.
Is it possible to debug the ram code on the Chip, because the build in ASC-BSL from the Chip has to receive the code over uart first,
and than the chip executes the ramcode if the lenght has reached....
If i connect a JLink to the device and try to debug, i havn't the ASC-BSL funktion and i havn't the ramcode present.. ....
What tools can i use for this? I use Dave4 and the OzoneDebugger.
Thanks for help.
I use the build in ASC BootStrapLoader and need to write a RAM-Code to handle a own Bootloader protocol over the USIC.
Is it possible to debug the ram code on the Chip, because the build in ASC-BSL from the Chip has to receive the code over uart first,
and than the chip executes the ramcode if the lenght has reached....
If i connect a JLink to the device and try to debug, i havn't the ASC-BSL funktion and i havn't the ramcode present.. ....
What tools can i use for this? I use Dave4 and the OzoneDebugger.
Thanks for help.
- Tags:
- IFX
0 Replies