infineon4engineers Facebook

infineon@google+ Google+

infineon@linkedin linkedin

infineon4engi@twitter twitter

infineon@youtube youtube

+ Reply to Thread
Results 1 to 2 of 2

Thread: [SOLVED] ADC1 Ch1 measurement in TLE9879

  1. #1
    New Member New Member Litun is on a distinguished road
    Join Date
    Aug 2017
    Posts
    26
    Points
    196.25

    [SOLVED] ADC1 Ch1 measurement in TLE9879

    Dear all,
    I am finding it difficult to measure the voltage in ADC1 Ch1(Opamp) in TLE9879.

    I have configured the EIM mode for ADC1 Ch1 Triggered by GPT12E_T6 as shown in the figure below.
    Click image for larger version

Name:	ADC_Ch1.JPG
Views:	9
Size:	88.4 KB
ID:	3414

    But I always see nearly a constant digital value(29,34,29,29,34............so on).

    Interestingly, when I check the same with the Channel4(P2.4) with the potentiometer, it works fine.

    Please suggest...! Thanks.


    Reg
    Litun
    Last edited by Litun; Apr 11th, 2018 at 02:23 AM.

  2. #2
    New Member New Member Litun is on a distinguished road
    Join Date
    Aug 2017
    Posts
    26
    Points
    196.25
    Got it. Chip CSA peripheral is dead.

+ Reply to Thread

Tags for this Thread

Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.