Mar 22, 2018
07:22 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Mar 22, 2018
07:22 AM
Hello
I wanted to reset the XMC 4400 chip to a specific address i.e. start of main function at Flash address 0x0C004210. I have used PPB->VTOR = 0x0C004210; but I wasn't able to reset to that specific address and it appears that the execution goes to 0x00000000 location and then it stops.
I was wondering what should the offset address be for the VTOR register so that the reset can occur properly to the address mentioned above.
Thank you
I wanted to reset the XMC 4400 chip to a specific address i.e. start of main function at Flash address 0x0C004210. I have used PPB->VTOR = 0x0C004210; but I wasn't able to reset to that specific address and it appears that the execution goes to 0x00000000 location and then it stops.
I was wondering what should the offset address be for the VTOR register so that the reset can occur properly to the address mentioned above.
Thank you
- Tags:
- IFX
0 Replies