Simulation not working for Rfid based security system

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Not applicable
I have been working on this project for a week, spending at least 2-3 hours daily on the computer trying to figure it out. I searched a lot of similar codes for this project and eventually, i successfully created a Hex file for the same. But the problem is that i am not able to run this on Proteus. The simulation starts successfully but nothing happens when i type, even the LCD doesn't display anything. It would be great if someone help me out because i am quite on the verge on loosing my mind here. I have absolutely no background on electronics and have to make this project because the subject requires it. I have included the Proteus file, C file and the HEX file https://drive.google.com/file/d/1dQ2_bdYHepIl6OKnsn1sDmUKA3ZqtkMb/view?usp=drivesdk . Please check it out and tell me what's wrong. Thanks!
0 Likes
0 Replies