Feb 02, 2018
05:04 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Feb 02, 2018
05:04 AM
Hello,
i want to sent 3 messages via SPI without reception.
After that i want to send messages and use the recepted Data.
My idea is, to implement the SPI without Fifo receive interrupt first.
After that i Flush the RX-FIFO an activate the interrupt.
Now the problem:
Is there any flag, which indicates the running of the SPI transmit?
I have no interrupt to reset the standard events.
After the RX-flush, it is possible that the SPI get new Data, which are just shifting out.
Best regards
i want to sent 3 messages via SPI without reception.
After that i want to send messages and use the recepted Data.
My idea is, to implement the SPI without Fifo receive interrupt first.
After that i Flush the RX-FIFO an activate the interrupt.
Now the problem:
Is there any flag, which indicates the running of the SPI transmit?
I have no interrupt to reset the standard events.
After the RX-flush, it is possible that the SPI get new Data, which are just shifting out.
Best regards
0 Replies