infineon4engineers Facebook

infineon@google+ Google+

infineon@linkedin linkedin

infineon4engi@twitter twitter

infineon@youtube youtube

+ Reply to Thread
Results 1 to 4 of 4

Thread: MCTROOL V2 with IRMCK099 and Eval-M1-05F310 board problem

  1. #1
    New Member New Member timwei is on a distinguished road
    Join Date
    Jan 2018
    Posts
    1
    Points
    15

    MCTROOL V2 with IRMCK099 and Eval-M1-05F310 board problem

    Hi
    I'm using MCRTOOL V2 with IRMCK099 and Eval-M1-05F310 board. I've download the 99series software,and looking for the sample code .
    However there are only IRMCP0199-1-D,IRMCP0199-0-PS,IRMCP0199-1-M1. There is no sample for Eval-M1-05F310 board.
    I've try all of them ,but in vain.I stuck at configuring the motor function.After I push the button, the motor 1 status indicator didn't change to ''motor 1 stop'',and it show DC Low voltage?

    Is there any setting for motor rated voltage ?and how many should the DC power supply output to the board?the motor's rated voltage?
    So where can i get the sample code for Eval-M1-05F310? or one of the three examples can be used for this board ?


    Best regards

  2. #2
    New Member New Member pierre jo is on a distinguished road
    Join Date
    Mar 2018
    Posts
    1
    Points
    20
    Hi,

    I am in the same case, is there any news?

    Best Regards

  3. #3
    Beginner Beginner Gintaras is on a distinguished road
    Join Date
    May 2018
    Posts
    2
    Points
    60

    Gintaras

    Hello,

    I am also at this point, I suppose nobody is supporting the EVAL-M1-05F310?

  4. #4
    Beginner Beginner Gintaras is on a distinguished road
    Join Date
    May 2018
    Posts
    2
    Points
    60
    Hi,

    After long datasheets reading and many fail attempts I have launched these two boards combined together.
    Here is what you have to do:

    1. Load project from IRMCS0199-1-M1 folder with MCE Designer.
    2. Program firmware IRMCK099FirmwareV15 to RAM from the same IRMCS0199-1-M1 folder.
    3. Now open TinyWizard software, select IRMCS0199-1-M1 demo board, mark both check box options and start yours own configuration.
    Some configuration will depend on yours motor, these you will have to find out, but some you can use from configuration file I have attached.
    4. Export whole configuration to .txt file and load it to the MCE Designer.
    5. Load configuration to the board by pressing "Configure Motor" button.
    6. Try to start it...

    You can also load config.txt file to the MCEWizard, just rename it config.tw

    Regards,
    Gintaras
    ?????

+ Reply to Thread

Tags for this Thread

Disclaimer

All content and materials on this site are provided “as is“. Infineon makes no warranties or representations with regard to this content and these materials of any kind, whether express or implied, including without limitation, warranties or representations of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, whether express or implied, is granted by Infineon. Use of the information on this site may require a license from a third party, or a license from Infineon.


Infineon accepts no liability for the content and materials on this site being accurate, complete or up- to-date or for the contents of external links. Infineon distances itself expressly from the contents of the linked pages, over the structure of which Infineon has no control.


Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Usage Terms of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Usage Terms of this site. Infineon reserves the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.